For all your favourite
off-road parts, accessories
and clothing
|
|
2006 Husqvarna TE 510 Centennial |
|
DIMENSIONS, WEIGHT, CAPACITIES |
| WHEELBASE |
in................57.48 |
| OVERALL LENGTH |
in.................87.2 |
| OVERALL WIDTH |
in.................32.28 |
| OVERALL HEIGHT |
in.................50.79 |
| SADDLE HEIGHT |
in.................38.38 |
| MIN.GROUND CLEARANCE |
in.................13.38 |
| TRAIL |
in.................4.49 |
| DRY WEIGHT |
lb.................261.2 |
| FUEL TANK CAPACITY |
u.s./imp.......2.64/2.2 |
| TRANSMISSION OIL |
u.s./imp.......1.48/1.23 |
ENGINE CHARACTERISTICS |
| TYPE |
single cylinder, four stroke |
| BORE |
in...........3.81 |
| STROKE |
in...........2.67 |
| DISPLACEMENT |
cu.in......30.56 |
| COMPRESSION RATIO |
- |
| (AT CLOSED PORT) |
12,5:1 |
| STARTING |
Electric |
| COOLING |
by liquid |
| WATER RADIATOR |
n. 2 |
| TIMING SYSTEM |
|
| TYPE |
dohc, 4 valve |
| VALVE TIMING |
|
| WITH VALVE CLEARANCE |
in............0.04 |
| INTAKE |
|
OPEN |
50° b.t.b.c. |
CLOSES |
77° a.b.d.c. |
| EXHAUST |
|
OPEN |
89° b.b.d.c |
CLOSES |
40° a.t.d.c. |
| TAPPET CLEARANCE (COLD ENGINE) |
|
INTAKE |
in..........0.04 |
EXHAUST |
in..........0,06 |
| LUBRICATION |
|
| TYPE |
dry sump with two oil pump rotor and cartridge filter, husqvarna system with oil pump |
| IGNITION |
c.d.i. electronic, with variable advance (digital control) |
| SPARK PLUG TYPE |
CHAMPION g59c |
| SPARK PLUG GAP |
in......0.0275 |
| FUEL SYSTEM |
- |
| CARBURETOR |
MIKUNI TMR 41 |
| VENTURI DIAMETER |
in......1.6 |
| CLUTCH |
wet, multiplate type; hydraulic control |
| DRIVING DISC No |
8 |
| DRIVEN DISC No |
7 |
| PRIMARY DRIVE |
|
| ENGINE STROCKET |
teeth......21 |
| CLUTCH GEAR |
teeth......64 |
| TRANSMISSION RATIO |
3.047 |
| TRANSMISSION |
constant mesh gear type |
| SPEED GEARS No |
6 |
| INTERNAL RATIOS |
|
|
1st........2,000(28/14) |
|
2nd........1,611 (29/18) |
|
3rd........1,333(24/18) |
|
4th........1,085(25/23) |
|
5th........0,920(23/25) |
|
6th........0.814 (22/27) |
| SECONDARY DRIVE |
|
| TRANSMISSION SPROCKET |
teeth......14 |
| REAR WHEEL SPROCKET |
teeth......50 |
| TRANSMISSION RATIO |
3,571 |
| DRIVING CHAIN |
|
| MANUFACTURER AND TYPE |
REGINA 135 rx (5/8x1/4) |
| OVERALL RATIOS |
|
|
1st.........21,769 |
|
2nd........17,536 |
|
3rd........14,321 |
|
4th........11,831 |
|
5th........10,014 |
|
6th........8,869 |
FRAME |
| TYPE |
steel single tube cradle (round tubes) |
|
rear frame in light alloy |
| FRONT SUSPENSION |
|
| TYPE |
"upside-down" telescopic hydraulic fork with advanced axle |
|
compression and rebound stroke adjustment |
| FORK LEGS DIA. |
in.........1.97 |
| TRAVEL ON LEGS AXIS |
in.....11.8 |
| FRONT FORK MANUFACTURER |
MARZOCCHI |
| REAR SUSPENSION |
|
| TYPE |
progressive "soft damp" type with single hydraulic shock absorber; spring |
|
preload adjustment, compression and rebound adjstment (compression |
|
stroke: double adjustment) |
| WHEEL TRAVEL |
in.......12.6 |
| SHOCK ABSORBER MANUFACTURER |
SACHS |
| FRONT BRAKE |
|
| TYPE |
BREMBO, fixed disc type with hydraulic control and floating caliper |
| DISC DIA. |
in.......10.24 |
| REAR BRAKE |
|
| TYPE |
BREMBO, fixed disc type with hydraulic control and floating caliper |
| DISC DIA. |
in.......8.66 |
| FRONT RIM |
|
| MATERIAL |
light alloy |
| SIZE |
1,60"x21" |
| REAR RIM |
|
| MATERIAL |
light alloy |
| SIZE |
2,15"x18" |
| FRONT TIRE |
|
| TYPE |
PIRELLI mt 83 scorpion |
| SIZE |
90/90-21" |
| REAR TIRE |
|
| TYPE |
PIRELLI mt 83 scorpion |
| SIZE |
140/80 - 18" |
| ELECTRICAL EQUIPMENT |
|
| VOLTAGE |
12v |
| LAMPS WATTAGE |
|
| HEAD LIGHT |
35/35w |
| PILOT LIGHT |
3w |
| TAIL LIGHT |
5w |
| STOP LIGHT |
21w |
| TURN SIGNALS |
10w |
| INSTRUMENT LIGHT |
2w |
| WARNING LIGHT |
1,2w |
| BATTERY |
12v-6ah |
|
|
